Whats your setup ?

[25YearsGrinding]

This is my new ride, a week ago:

Mini Logo deck @ 8.5 x 33.5
Independent 149's
Bones Hard Bushings
Mini Logo Wheels 52mm
Bones Swiss L2 Bearings

I like it a lot, except the Mini Logo wheels, they don't slide too good.

[Babe, Mr. Ruth if you're Nasty]

"Gently Used" Creature Brue Killer 8.0"
Indy 149's
Spitfire 59 mm.
Indy Bearings
Indy Hardware
Some dirty ass grip.

[krusher]

Wade Speyer Black Label Big Boy Board
Thunders
Spitfire
Alchemy "Sphinx" grip





This is the Anti-Minnesota Vikings set up...

[Joe]

deathwish power logo 8.25
indy trucks
bones wheels and bearings
misc hardware
mob grip

[krusher]

I wish we had @ notices and hashmark's here, 'cause my last post was total bogus @C H U C K

[James]

8.25 zero acid test board
7.5 theeves in orange because any other colors not orange
reds (not the bearings the Russian people)
bones 100s the mashed potatoes of course
black magic grip
oh and i just got the Chris Cole cold war board today (its cool bra)

[C H U C K]

Wade Speyer Black Label Big Boy Board
Thunders
Spitfire
Alchemy "Sphinx" grip





This is the Anti-Minnesota Vikings set up...

Hey, we're riding the same exact set up!

[krusher]

^ AND WE'VE GOT THE SAME HARDWOOD FLOORS AND BAR STOOL TOO! hahaha

I saw your deck at my local skate shop and I do have to admit that it is truly a big boy board. Most of my friends are sporting that size and I still can't leave my beloved 8.25.

While I was at the shop I got these for my wall.



I'm planing on getting a board for every pro that has skated my house. Next board should be a Habitat Daryl Angel.

Back to my legit set up



It's a 8.25 JUST SKATEBOARDS deck from a local San Diego Company that has been around for 6 years.

ACE 44's that I've had for a year so the axle is almost peeking through. Back in the summer of '88 I found that if I loosened my trucks I could grind the parking blocks at the Taco Bell a lot better; I've been riding loose trucks for that many years...

Bones 54 SPF's I prefer 53's but what are you gonna do? They're the Greeks model but I didn't have time to sand off the graphic to lighten them up, people were waiting. The next day I scored some 53 STF's so those might be on my next ride.

Swiss 6 Balls 2 years old and still running good

Shorty's hardware, I ordered some Typical Culture X Roughneck bolts but have yet to receive them

I got free grip with the JUST boards, it works. I'm waiting on some Alchemy stuff so that will be on my next ride (hopefully

I need a new pair of jeans size 36, every pair I find doesn't have the stretchy stuff so they're cool for other stuff but when I skate them they stick to my leg.

I'm riding some Half Cabs now and they work but the tongue is always sticking out 'cause I like to wear my shoes loose so I can slip them on and never tie notes. I scored a pair of Fallen Rookie's but they're too tight for me, I've got some Chukka Low's waiting in the wings. I forgot to mention they're size 11.

I made a drunken video of how loose my trucks are and was bummed that I couldn't get my kingpin to turn (most of the time I can get it to turn), so there's an edit...

So grab that skate tool and loosen your trucks kids... Loose Trucks Saves Lives...

Loose Trucks Save Lives

I'm black out drunk as I post this so tomorrow I wont care about the time I've wasted on making this post, shit I don't now if I'll remember making it...

[Scott Smeets]

Baker Jim Greco deck
Thunder trucks
Baker 51

[highway]

palace jankanoo 8.1, thunder 145 (i am not sure), spitfires 53's and some cheap bearings

edit. forgot to mention my old scruffy ass grip tape

[Dempske]

Almost x Switch collaboration 8.0 (switch is my local skateshop in delaware and they did a collab)
Thunder 147's
Spitfire bryan herman 53mm
Reds bearings
Jessup Grip

[susej]

Best Friend Skateboards 8"
Indy solo cross forged hollow 139
Bones 53mm
Bones Swiss Ceramic

[krusher]

^ Wait is that Best Friend board Canadian Maple or Ash? And how does one mount.... blah blah bla...

[susej]

Um... what?

[krusher]

I was just saying from your post I couldn't tell if you wore snapback, or flexfit hats...